3. Controller

Acesight Instructional Video #3: Controller

Transcript

We strive to provide an accurate transcription, though errors may occur. Please help us improve by reporting it once you find any. Thank you!

All right, so let’s just take a closer look then at the controller.

 

So, the controller is fairly simple. If you have ever used the TV remote this is probably going to be easier for you. It is connected via a cable to the headset. This is necessary because inside the controller is a rechargeable battery.
The battery on full charge will run for more than four hours of continuous use. In terms of the buttons on the device, so I want to focus first on the ones at the top, you see two orange buttons.

 

The one with the plus symbol and one with a minus symbol. These are the buttons that you press to go larger and smaller. Each press release is not continuous zoom, so you’re going to press it at least each time, will increase or decree by a factor of 1X [magnification].

 

The arrow buttons that we see on the left and the right. These are used to adjust contrast and also thickness of lines when they’re using the outline feature of Acesight. I will look at the outline feature later.

 

In terms of activating outline, that is done by pressing the button to the left here, and over on the right when we press this button, it is going to step through high contrast. As you can see in this example, when we press the high contrast button it starts out with white on a black background. I press it again and we now see black on white. If we press it again, and we were looking at different color combinations.

 

If at any time, you want to come back to where you were in terms of natural color, I simply press the large button at the bottom. Just one press like that, and as you can see, I’m now looking at things again in regular color.

 

On the right-hand side of the device, there are two buttons. The blue button that we see is the power button. So normally I would press and hold this button for a couple of seconds to switch the device on. The same for switching it off. The button below that is the capture button, and we use the capture button to do just what it states. We take a photograph of something so we can look at it for a longer period of time without holding it. If I turn the device over to the left side, there is just one more thing remaining, and that is the port for charging. We will look at that in another video.

Go Back to Watch Some Other Instruction Videos

Click Here